ECWPlumbing · Eatonville (253) 254-4061 Get help

Graham, WA · Pierce County

A plumber for Graham, 15 miles up the road.

Eric Williams is a state-certified plumber based in Eatonville, about 25 minutes south of Graham on WA-161. Leaks, water heaters, frozen pipes, drains and remodel plumbing for Graham homes.

  • Licensed plumbing contractor
  • Bonded & insured
  • Eric does the work
Freeze watch · Graham --°F Checking the National Weather Service… See the week

Freeze watch · Graham · live

Will Graham pipes freeze this week?

Overnight lows for Graham from the National Weather Service, updated every time you load this page. Nights at 32°F or below are marked.

Loading the Graham forecast…

Source: National Weather Service forecast for Graham, WA (api.weather.gov)

What to do if a pipe freezes

What Eric does in Graham

The plumbing in a Graham house, handled.

  1. Leaks & repairs

    Dripping, running, leaking or just not working right. Found and fixed.

  2. Drains

    Slow sinks, clogged tubs and backed-up lines cleared.

  3. Bathrooms & kitchens

    New fixtures, showers, tubs and full remodel plumbing.

  4. Repipes & new lines

    Old or failing supply lines replaced, and plumbing for additions and new builds.

7161507702 GrahamEatonvilleKapowsinOhop ValleyRoySpanaway 15 mi · 25 min Mt. Rainier5 miN
Driving route: OSRM. Map data © OpenStreetMap contributors, U.S. Census Bureau.

Eatonville to Graham

A straight run up 161.

About 15 miles, 25 minutes

Straight up WA-161 from Eatonville. Graham is the nearest of the bigger towns Eric covers.

Permits through Pierce County

Graham is unincorporated, so plumbing permits and inspections go through Pierce County Planning & Public Works.

Nearby, too

Graham homes, by the numbers

Newer houses, real winters.

When Graham's homes were built

51% went up 1990 to 2009

First water heaters from then are long past 8 to 12 years. Check yours.

Freeze season near Graham

60 freezing nights a year

Normal dates at McMillin Reservoir, 6 miles away. Four of the last five winters dropped into the teens.

Manufactured homes

1 in 9 is a manufactured home

The line under the skirting freezes first. That's what heat tape is for.

  • On a well?

    No water can be the pump, pressure tank, switch or a frozen line. Tell Eric which.

  • Replacing a water heater?

    It has to meet today's code. What's included.

  • Heat tape cracked or brittle?

    Replace it before winter. Old heat tape is a fire risk.

Sources: U.S. Census Bureau, American Community Survey 2020 to 2024 (Graham CDP, 11,541 homes). NOAA 1991 to 2020 climate normals, McMillin Reservoir.

Graham questions

Straight answers for Graham homeowners.

Updated November 2026

Does ECW Plumbing work in Graham?

Yes. Graham is one of the 10 towns Eric Williams serves from Eatonville, along with Kapowsin, Spanaway, Roy and Yelm. Call (253) 254-4061 or send a request with your address.

How far is Graham from Eatonville?

About 15 miles by road, roughly 25 minutes up WA-161 (Meridian). Graham is the closest of the bigger towns Eric covers.

Who issues plumbing permits in Graham?

Graham isn't a city, so plumbing permits and inspections go through Pierce County Planning & Public Works.

For water heaters, the county reminded installers in February 2026 that a replacement has to be at least as efficient as the old one, and electric tank heaters must be Demand Response Ready (RCW 19.260.080).

How often do pipes freeze around Graham?

NOAA's 1991 to 2020 climate normals show about 60 nights a year at or below 32°F at McMillin Reservoir, the nearest long-running weather station, about 6 miles from Graham. Four of the last five winters there dropped into the teens, down to 12°F on December 28, 2021.

Is Eric licensed to work in Graham?

Yes. Washington plumbing licenses cover the whole state. ECW Plumbing LLC holds plumbing contractor license ECWPLPL791MA, and Eric is a state-certified plumber. You can look both up on the Washington L&I website.

Something leaking in Graham? Call Eric.

If water is coming through a ceiling, shut off the main first, then call.